Command Center

Turn AI findings into realized savings.

Command Center gives engineers one ranked list of the work worth doing, then tracks each Project through to its savings.

OverviewFloorsEquipmentInsightsProjectsTasksReportsCharts

4400 Lexington Tower Monday, 2:18 PM

71.6°FHumidity 46.2%Tue74°/58°Wed69°/55°Thu72°/57°

WorklistMy ViewTeam View

Top Projects to Accept$22,840

Resolve VAV-1 undersupply$16,800 4400 Lexington Tower Craig NNudge

Return AHU-3 to schedule$3,300 4400 Lexington Tower Sam AAccept

Reset AHU-5 duct static pressure$2,740 4400 Lexington Tower Gus PNudge

Opportunities pay off only when the work gets done. Command Center keeps every Project moving, from identification to realized savings.

Skip the triage.

Engineers used to piece together what was outstanding from Tasks, Projects and comment threads on separate pages. Command Center ranks that work in one list.

Top Projects to Accept$22,900

Return AHU-3 to schedule4400 Lexington Tower · Sam A$3,300

Retune VAV-22 valve loopThe Cromwell Building · Gus P$2,900

Optimize CH-2 stagingOne Northstar Place · Craig N$9,600

Fix B-1 short cyclingRiverside Exchange · Sam A$2,900

Replace AHU-7 actuator1850 Sequoia Center · Craig N$4,200

Nothing slips through the cracks.

Accept a Project and its next Task goes straight to its assignee. Team View shows managers which items are moving and which need a push.

Top Projects to Accept

Return AHU-3 to schedule4400 Lexington Tower$3,300Accept

Fix B-1 short cyclingRiverside Exchange$2,900Accept

Tasks to Start

Restore the AHU-3 occupancy schedule Return AHU-3 to schedule Sam A

Replace the VAV-31 damper actuator VAV-31 damper stuck closed Gus P Nudge Nudge sent to Gus P

Sync Tasks to your CMMS.

Noda's AI agents write the Tasks for each Project they identify, naming the equipment and the change to make. Sync a Task to your CMMS as a work order, and technicians receive those instructions in the system they already work from, with nothing retyped.

Identified by AIReturn AHU-3 to schedule$3,300/yr

Restore the AHU-3 occupancy scheduleCreate work order

CMMS · Work order WO-48213Open

Restore the AHU-3 occupancy schedule4400 Lexington Tower · AHU-3

Savings you can report.

Close out a finished Project and its savings count toward Realized Savings. Portfolio managers see the return across the portfolio without checking each building in turn.

Projects to be Verified

Reset AHU-4 economizer minimumThe Cromwell Building$13,200 Mark Done

Realized Savings$739,640+$13,200

Run the whole portfolio from one page.

The portfolio view brings together the work and the savings across buildings. Select a building to see that building's worklist and performance.

Halverson Pratt Realty5 buildings

4400 Lexington Tower Monday, 2:18 PM · 71.6°F

Portfolio PerformanceRealized Savings$752,84038 Projects Completed146 Tasks Completed

Noda's AI agents find the work.
Command Center gets it done.

One page for the work and the results.

Report the savings delivered over the last 30 days, 12 months or all time, alongside emissions reduced and energy saved.

WorklistMy ViewTeam View

Top Projects to Accept$22,900

Optimize CH-2 staging$9,600 One Northstar Place Craig NNudge

Replace AHU-7 actuator$4,200 1850 Sequoia Center Craig NNudge

Return AHU-3 to schedule$3,300 4400 Lexington Tower Sam AAccept

Retune VAV-22 valve loop$2,900 The Cromwell Building Gus PNudge

Fix B-1 short cycling$2,900 Riverside Exchange Sam AAccept

Projects to be Verified$13,200

Reset AHU-4 economizer minimum All Tasks complete The Cromwell Building Gus P Nudge

Tasks to Start

Recalibrate the AHU-2 supply air sensor AHU-2 discharge air setpoint adherence+2 One Northstar Place Craig NNudge

Replace the VAV-31 damper actuator VAV-31 damper stuck closed The Cromwell Building Gus PNudge

Tasks to Complete

Tighten the CH-1 chilled water reset CH-1 chilled water supply reset One Northstar Place Sam AMark Done

Frequently asked questions

How does Command Center rank the work?
By rule. Within each category, items rank by priority (high, then medium, then low), then by estimated savings, highest first, then by age, oldest first. Tasks take their parent Project's priority and savings.
Can Noda send work orders to our CMMS?
Yes. Noda syncs Tasks to supported CMMS platforms as work orders. Each work order carries the instructions Noda's AI agents wrote for the Task, including the equipment and the change to make, so technicians start the work with the diagnosis in hand.
Where does Command Center appear?
Command Center is the Home page every user lands on after login. It opens at the scope that matches the user's access: the whole portfolio, or a single building. Selecting a building in the portfolio view opens that building's Home.
Can a manager see the whole team's work?
Yes. Team View shows all the work across the buildings or portfolio a user is associated with. On items assigned to someone else, Nudge opens a comment thread with the assignee.
How does Command Center work with the Noda Assistant?
Command Center holds the planned work: the Projects Noda's AI agents find and the Tasks that carry them out. The Noda Assistant answers questions on demand from any building's pages, for the issues that come up between Projects, such as a tenant complaint.